Type Working width cm Blade height cm Weight kg
PB 1200 120 52 350
PB 1400 140 52 380
PB 1800 180 68 595
PB 2000 200 68 620
PB 2200 220 68 645
PB 2450 245 68 665
PB 2650 265 68 700
PB 2850 285 80 850

AP powerblades

  • Fast and accurate levelling on grade line
  • Increases the productivity
  • Removable Hardox knives
  • Hydraulic doors
  • 2 Directions (forwards building in, backwards fine finishing)
  • Limited maintenance

The AP Powerblade is designed to build in large amounts of material and directly level it out to the on grade line. A dumped bulk of ground / sand can directly be levelled by the Powerblade. Speed, power and large quantities are the keywords.
The AP Powerblade functions best when combined with a skid-steer loader but can also be used with a wheel loader. Next to the moving and levelling of sand and ground the machine can also be used to relocate mixed granulate.

The compact construction of the Powerblade provides a high stability and optimal control. The doors, hydraulically controlled from the cabin, enable the machine to level closely to any edges. Optionally the Powerblade can be equipped with a finishing plate / bucket, locked between the doors.

Because both the proportional valve block and the cables are installed on the Powerblade the machine is simply and quickly ready for use, furthermore it enables a flexible switch from loader.

Highly accurate in combination with laser control. Thanks to the unique combination with the APMB-1 control box it is possible to work with the easy to operate “on grade” line adjustment. The on grade level can be determined from the cab. At some skido-steer loaders the control of the Powerblade can be integrated in the joysticks.

Standard equipment AP Powerblade

  • Removable Hardox knives
  • 2 Stainless steel receiver masts
  • Hydraulic doors
  • Double functioning cylinders
  • Quadruple hydraulic block proportionally controlled
  • Complete wiring

Options AP Powerblade

■  Extendable masts with scaling
■  Finishing plate / bucket
■  APMB-1 control box
■  Sonic tracker
■  Slope sensor
■  Machine receivers
■  Bobcat/Cat interface kit
■  3D, GPS or total station
■  Special version for working in rocky conditions
■  Vertical indication on APMB-1 box
■  Height indication on APMB-1 box
■  Hydraulic doors on back side
■  Sprayed in a color of choice (if RAL color)

Optional : Bobcat/Cat interface 

If the AP Powerblade is coupled to a Bobcat/Cat skid-steer loader it is possible to control the Powerblade through the joysticks of the loader. This tremendously accelerates the operator use.