Technical specifications series PG/TG

Type Width cm Depth cm Height cm Capacity m³* Weight kg
PG 1800 180 95 115/165 1,05 565
PG 2000 200 95 115/165 1,15 605
PG 2200 220 95 115/165 1,25 695
PG 2400 240 95 115/165 1,35 735
TG 1800 180 95 115/165 1,05 660
TG 2000 200 95 115/165 1,15 700
TG 2200 220 95 115/165 1,25 790
TG 2400 240 95 115/165 1,35 830

* Capacity when frame is closed
Standardly equipped with hydraulic hoses and ½” male BSP couplings
Necessary hydraulic power : 25 l./min. – 180 bar (max. 50 l./min. – 200 bar)

Standard equipment series PG/TG
Increased back profile
Wear-resistant knife in 500 HB grade steel
Flat bottom
Plate thickness 6-8 mm
Boltable quick attachments

Options series PG/TG
Pressure safety valves
All common quick attachments

Technical specifications series PGX/TGX

Type Width cm Depth cm Height cm Capacity m³* Weight kg
PGX 2600 260 140 130/190 2,00 1800
PGX 2800 280 140 130/190 2,20 2060
PGX 3000 300 140 130/190 2,40 2300
TGX 2600 260 140 130/200 2,00 1400
TGX 2800 280 140 130/200 2,20 1475
TGX 3000 300 140 130/200 2,40 1525

* Capacity when frame is closed
Standardly equipped with hydraulic hoses and ½” male BSP couplings
Necessary hydraulic power : 50 l./min. – 180 bar (max. 80 l./min. – 220 bar)

Standard equipment series PGX/TGX
Extra stiffening profile in bottom
Increased back profile
Reinforced back
Plate thickness 10 mm (extra strong steel Domex 420)
Wear-resistant Hardox knife on back side
Double, wear-resistant knife in 500 HB grade steel
Pressure safety valve
Welded quick attachments

Options series PGX/TGX
Increased perforated plate on back / bucket
All common quick attachments
Preparements for Z kinematics

AP Grab buckets

Features:
• Increased back profile (prevents spilling)
• Wear-resistant knives in 500 HB grade steel
• Fixed sides for stability
• Heavy, stable construction
• Bucket in Domex 420 steel

The types:

PG/TG series

The AP grab buckets, type PG / TG are perfectly suitable for use to a front loader, telescopic handler and medium sized wheel loader. The machines are equipped with a completely flat bottom so no feed rests will be left behind; furthermore it makes the machine easier to clean. Although the bucket has no strengthening ribs, the special form and the strong material ensure that the bottom is at least just as strong as if it was provided with these ribs. The increased back, and thus a small distance between the upper frame and the bucket, avoids spilling of feed. Thanks to the ingenious geometry the upper frame (when opened) will not extend the bucket. This makes it possible to move the bucket to a wall and shovel all the material, so no rests will be left behind and the upper frame will not touch the wall.
Widths from 180 to 240 cm, the capacity varies from 1,05 to 1,35 m³.

The types PG come with fixed Domex tines, the types TG are provided with removable Kverneland tines. All types can be equipped with all common quick attachments. The attachments are bolt-fitted and therefore easily replaceable.

PGX/TGX series

The AP grab buckets, type PGX / TGX are heavy, robust machines with a large capacity, suitable for use to a heavy telescopic handler or wheel loader. The stiffening profile in the bucket gives the machine extra strength to allow the PGX / TGX to accomplish the toughest tasks.

The increased back profile avoids spilling of feed. Thanks to the ingenious geometry the upper frame (when opened) will not extend the bucket. This makes it possible to move the bucket to a wall and shovel all the material, so no rests will be left behind and the upper frame will not touch the wall.

The PGX / TGX is provided with heavy pivot points and can be equipped with all common quick attachments (welded).

The types PGX come with fixed tines (thickness 25 mm) and an extra heavy frame with 3 pivot points. The types TGX are equipped with removable Kverneland tines and an extra heavy top frame with 2 pivot points. Widths from 260 to 300 cm, the capacity varies from 2,25 to 2,70 m³.

PG/TG serie

PGX/TGX serie