Basic levellers

Type Working width cm Blade height cm Weight kg
BLE 1400 140 40 330
BLE 1600 160 40 350
BLE 1800 180 40 370
BLE 2000 200 50 390
BLE 2200 220 50 410

BullBlaster leveller

Type Working width cm Blade height cm Width with doors
open cm
Weight kg
M-LEV 1200 120 40 163 410
M-LEV 1400 140 40 183 425
LEV 1200 120 52 196 475
LEV 1400 140 52 216 525
LEV 1600 160 52 236 590
LEV 1800 180 52 256 640
LEV 2000 200 65 293 920
LEV 2200 220 65 313 980
LEV 2450 245 65 333 1040
LEV 2650 265 65 353 1080
LEV 2850 285 65 373 1150

Push Pull leveller

Type Working width cm Working width with doors open cm Blade height cm Weight kg
PP 1400 140 220 52 650
PP 1600 160 240 52 675
PP 1800 180 260 52 700
PP 2000 200 280 52 740
PP 2200 220 300 52 775
PP 2450 245 335 65 850
PP 2650 265 355 65 900

3D leveller

Type Blade height
cm
Working width
cm
Working width with doors open cm Weight kg
(depending on options)
3D-LEV 2000 TT 60 200 270 1600
3D-LEV 2200 TT 60 220 290 1700
3D-LEV 2450 TT 60 245 315 1825
3D-LEV 2650 TT 78 265 371,5 2525
3D-LEV 2850 TT 78 285 391,5 2700
Type Blade height
cm
Working width
cm
Working width with doors open cm Weight kg
(depending on options)
3D-LEV 2000 PP 60 200 270 1200
3D-LEV 2200 PP 60 220 290 1300
3D-LEV 2450 PP 60 245 315 1425
3D-LEV 2650 PP 78 265 371,5 2150
3D-LEV 2850 PP 78 285 391,5 2350

The types

Basic levellers

The AP Basic leveller is a basic leveller to combine with smaller wheel and skids-steer loaders. This compact leveller is available in working widths from 140 cm to 220 cm. The machine is equipped with a torsion plate on the front that determines the height. Driving backwards the machine levels the subsoil at the desired height or slope.

The AP basic leveller is a simple but effective levelling machine, perfectly suitable for the levelling of pavements, drives, squares etc. The compact construction of this leveller makes it possible to transport a mini wheel loader along with the leveller on a trailer.
The AP basic leveller is standardly supplied with the AP basic control box, proportional control and two stainless steel receiver masts. The height adjustment is controlled by two cylinders on a torsion plate which guarantees levelling to millimeter accuracy.
This compact leveller is available in working widths from 140 to 220 cm. The machine is equipped with a torsion blade on the front that determines the height. Driving backwards the machine levels the subsoil at the desired height or inclined. Hereafter the subsoil is free of tracks and one can start paving or vibrating immediately. The AP basic leveller comes as standard without quick attachments and machine receivers.

  • Quick and accurate levelling at the proper height
  • Easy to operate
  • Changeable knives
  • Atractively priced

Required :

√ Power supply 1 x 2V

√ 1 Double functioning hydraulic valve with return flow

√ Free floating position on wheel loader


Standard equipment AP basic levellers 

  • Changeable Hardox knives
  • 2 Stainless steel receiver masts with scaling
  • 100% Proportional valve block & accumulator
  • Fixed sides
  • Pressure and return hose
  • Stabilizer
  • Double functioning cylinders
  • Torsion plate
  • AP basic control box
  • Complete wiring

Options AP basic leveller

■  Machine receivers (brand and type of choice)
■  Attachments (screwable)
■  APMB-1 control box
■  Sprayed in a color of choice

BullBlaster leveller

The AP Bullblaster leveller is a leveller with a loading function. The front side is provided with a finishing plate with shovel bucket with which material can be shoveled and compacted. The rear side of the leveller is equipped with a cutting knife to level the material driving backwards.

  • Dozing, compacting and grading with your wheel loader
  • Laser controlled, no manual finishing
  • Removable Hardox knives
  • Hydraulic doors
  • Quick and highly accurate

The AP leveller BullBlaster is used for the levelling of all kinds of materials on roads, parkings, squares etc. and for the levelling of planes under slope(s) for water drainage to the draw-wels. The leveller is suitable for the use with wheel loaders, skids steers or tractors.

The rear side of the leveller is equipped with a cutting knife, the front side is provided with a finishing plate with bucket (for transportation of material). The cutting knife and the finishing plate are controlled separately; during the last pass the front blade can be put in floating position creating an optimal result.
The AP leveller is unique in its genre because the knife gets vertically into the ground immediately when the automatic function is engaged. With the help of the laser the machine directly searches the right level, after which backwards and thus free of tracks can be levelled.

In combination with Topcons LSB-110 machine receivers the BullBlaster can offer true proportional control to 0,5 mm accuracy. No more over- or undershooting when controlling the blade.

Required:

√ Power supply 1 x 12V or 24 V / 10 amp.
√ 1 Double functioning hydraulic valve with free return flow
√ Free floating position on wheel loader

Standard equipment AP leveller BullBlaster 

  • Changeable Hardox knives
  • Changeable Hardox bottom
  • Hydraulic doors
  • 2 Stainless steel receiver masts
  • Quadruple hydraulic block proportionally controlled

Options AP levellers – type BullBlaster 

■  Extendable masts with scaling
■  Laser control
■  APMB-1 control box
■  Topcon LSB-110 proportional receivers
■  Sonic tracker
■  Slope sensor
■  3D, GPS or LPS
■  Sprayed in a color of choice
■  All common quick attachments

Push Pull leveller

The AP Push Pull leveller is a leveller especially designed for doing 2 jobs with 1 machine. You can build in materials pushing forwards en thereafter you can level your plan driving backewards. It can be coupled on both sides of the wheel / tracked loader.

The AP Push Pull leveller is especially designed for doing 2 jobs with 1 machine. You can build in materials pushing forwards and thereafter you can level your plan driving backwards. It can be coupled on both sides of the wheel / tracked loader. Through a sensor the control knows in which direction you are operating and will automatically change the steering from left to right and vice versa. It is highly accurate in its finish and will deliver the perfect design.

The AP Push Pull leveller is in many ways a combination of the AP Powerblade and the AP BullBlaster leveller, the advantages of this machines have been brought together.

Standard equipment 

  • Removable Hardox knives
  • Removable Hardox bottom
  • Hydraulic doors
  • Quadruple hydraulic block proportionally controlled, including accumulator and cables
  • Sensor for backwards/forwards driving
  • 2 Stainless steel receiver masts

Options

  • APMB-1 control box
  • Extendable masts with scaling
  • Topcon LS-B110 machine receivers
  • AP slope sensor
  • 3D, GPS or total station
  • Topcon sonic tracker
  • Vertical indication on APMB-1 box
  • Height indication on APMB-1 box
  • Sprayed in a color of choice
  • Quick attachments

3D leveller

The AP 3D leveller  is especially designed for working with 3D control (Total Station or GPS). The blade functions the same way as a dozer blade with a fixed turning point in the middle of the blade. The difference between the 3D leveller and the Push Pull leveller is that the 3D leveller can put the blade at a slope from a fixed turning point and the Push Pull leveller from two independant cylinders.

The AP 3D levellers are especially designed for working with 3D control (Total Station or GPS). The blade functions the same way as a dozer blade with a fixed turning point in the middle of the blade. The height is controlled through a fixed finishing plate (with a changeable wear plate). Furthermore the machine is equipped with an intelligent slope sensor (MC2 sensor) that, if necessary, corrects the leveller at a high reaction speed.

The difference between the 3D leveller and the Push Pull leveller is that the 3D leveller can put the blade at a slope from a fixed turning point and the Push Pull leveller from two independant hydraulic cylinders.

The AP 3D leveller is available in two types :

  • Type TT is equipped with a turntable so you can simply switch between forwards driving (build in) and backwards driving (final finish).
  • Type PP is, just like the Push Pull leveller, provided with a detachable carriage to switch between forwards and backwards working.

Standard equipment

  • Removable Hardox knives
  • Removable Hardox bottom
  • 5-Way (PP) / 6-way (TT) proportional hydraulic block
    including accumulator and cables
  • Hydraulic doors
  • Sensor for backwards / forwards driving (so the control automatically recognizes the appropriate driving direction)

Options

  • APMB-1 control box
  • 3D unlock code for Topcon
  • 3D total station with MC2 sensor
  • 3D single GPS with MC2 sensor
  • Extendable masts with scaling
  • Special version for rocky conditions, with cylinder protection and safety valves for the doors
  • Sprayed in a color of choice
  • All common quick attachments

Basic

Bullblaster

Push Pull

3D