Hydraulic drive unit for rigid mount up to 9t

Type Tonnage Opening Closing force
A04HPX 2 – 4t 1043 mm 18 kN
D04HPX 2 – 4t 1045 mm 18 kN
A06HPX 4 – 6t 1344 mm 18 kN
D06HPX 4 – 6t 1350 mm 18 kN
T06HPX 4 – 6t 1210 mm 17 kN
A09HPX 6 – 9t 1545 mm 15,5 kN
D09HPX 6 – 9t 1545 mm 15,5 kN
T09HPX 6 – 9t 1210 mm 17,5 kN

The information about the closing force refers to the max. working pressure of 250 bar.

Hydraulic drive unit for cardanic mount up to 9t

Type Tonnage Opening Closing force
C05HPX 3 – 6t 1110 mm 25 kN
C08HPX 6 – 9t 1250 mm 22 kN
R05HPX 3 – 6t 1210 mm 18 kN
R08HPX 6 – 9t 1210 mm 18 kN

The information about the closing force refers to the max. working pressure of 250 bar.

Hydraulic drive unit for rigid mount up to 40t

Type Tonnage Opening Closing force
D27HPX 20 – 27t 2000 mm 79 kN
D32HPX 25 – 32t 2150 mm 72 kN
D37HPX 32 – 37t 2250 mm 69 kN
T40HPX 4/3 25 – 40t 2900 mm 43 kN

The information about the closing force refers to the max. working pressure of 350 bar.

Hydraulic drive unit for cardanic mount up to 40t

Types Tonnage Volume Closing force
C40HPX 20 – 40t 1250 – 5000 l 55 – 69 kN
C40HPX-C 20 – 40t 2250 – 5000 l 55 – 63 kN
T40HPX 20 – 40t 1.0 – 2.5 m2 24 -41 kN
T40HPX 4/3 25 – 40t 1.14 m2 43 kN

The information about the closing force refers to the max. working pressure of 350 bar.

Functional exchange, depending on demands!

During times of growing costs and environmental awareness, efficient working is getting more and more important. The HPXdrive stands out thanks to its extended lifetime compared to a conventional cylinder-driven grab. Not only the maintenance downtimes are reduced but also the operational expenses. The integrated shell exchange system and the different available shell options provide for a higher flexibility on the one hand, and lower the asset cost for additional attachments on the other hand.

CUSTOMER BENEFITS:

FLEXIBLE OPERATION

Fast and uncomplicated response to requirements to be more competitive.

LOW MAINTENANCE

No greasing points at the HPXdrive that need to be lubricated on a daily basis, saving time and maintenance costs.

LESS WEAR

The compact and extremely robust design without hydraulic cylinders or short hoses lower the risk of damages.

HIGHER EFFICIENCY

More powerful working thanks to constant closing forces during the entire gripping performance. The tasks can thus be finished faster and the wear is kept to a minimum.

Compact design

The compact and very robust design of the HPXdrive unit has no greasing points and combined with a KINSHOFER directly mounted rotator, there are no short connecting hoses required anymore (internal hydraulic connections).

P51VHD-Magnet Kinshofer Orange Peel Grab with Magnet

Huge Heavy Duty Orange Peel Grab from Kinshofer

P80VHD Kinshofer Orange Peel Grab